-20%
,

2WD L293D WIFI Smart Robot Car With NodeMCU + Shield Kit For ESP-12E Based On ESP8266

Availability:

99 in stock


AED 80.00 AED 100.00

Compare
Descriptions:
This WiFi RC smart car is designed and developed based on ESP12E from ESP8266, which can be controlled by mobile, PC.
This tank/car chassis is assembled by ESP8266 WiFi module.By the Apps, the tank/car chassis can finish some basic functions, such as, forward, left & right, back, and return.

Some useful download links:

About ESP-12E motor shield, you can click here to know more   and   wiki
   and the manual about ESP-12E motor shield.

About NodeMCU board:
 1. more info to click refer wiki,there are some download link in it.

Specifications
Motor power supply(VM) 4.5V ~ 36V, can be a separate power supply
Control power(VIN) 4.5V ~ 9V (10VMAX), can be powered separately
Logic Operating current Iss ≤60mA (Vi = L), ≤22mA (Vi = H)
Working current driving portion Io ≤1.2A
Maximum power dissipation 4W (T= 90℃)
Control signal input level High: 2.3V≤VIH≤VIN;
Low: -0.3V≤VIL≤1.5V
Working temperature -25℃ ~ +125℃
Drive Type Dual high-power H-bridge driver
Current continuous transmission: ≈70mA (200mA MAX),
Standby: <200uA;
Transfer rate 110-460800bps
Car battery 4 x AA batteries(Package not included)

Features:

– The module provides short-circuit sub (short the VM and VIN), you can easily use one power (which must be 4.5V ~ 9V) simultaneously drive and control the motor.
– Support wireless 802.11 b / g / n standards.
– Support STA / AP / STA + AP three operating modes.
– Built-in TCP / IP protocol stack to support multiple TCP Client connection (5 MAX).
– D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA.
– AD0: 1 Road ADC.
– Support UART / GPIO data communication interface.
– Remote firmware upgrade (OTA).
– Smart Link supports intelligent networking capabilities.
– As for this WiFi car kit, it can work at many modes, such as AP mode and STA mode.
AP mode:
– When get the DoitCar, the default mode is AP. Under this mode, the default SSID nameis Doit WiFi, and password is 12345678.
– Usage Steps:
  1. Open the power from the smart car.
  2. Search the AP SSID name DoitWiFi, and then connect it.
  3. Open the APP from your phone, if your has no this APP, please download (click here) and install it.
  4. After connect successfully, can let car Forward, Back, Stop, Turn Left, TurnRight, Left to Accelerate, and Right to Accelerate, etc.
STA mode:
– Under the STA mode, the DoitCar can be controlled by phone APP, WeChat, and page frominternet.
– Note that, if using STA mode, you should firstly download the DoitCarControl.lua (https://github.com/Smart/DoitCar) into the DoitCar. For more details about download methods, please visit the documents on NodeMCU development.
– Before download the DoitCarControl.luainto the control-board, you must let the SSID name and password in DoitCarControl.lua same as the ones in your router.
– In addition, in the DoitCarControl.lua, you can rename the car as the one you like (the defaultname is car). This name is used as the device name controlled by mobile phone,Wechat, and web-page.
Package included:
1 x Car chassis Kit( not battery)
1 x ESP-12E motor shield
1 x NodeMCU development board
SKU: N/A Categories: ,
Shipping Warehouse

UAE, China

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “2WD L293D WIFI Smart Robot Car With NodeMCU + Shield Kit For ESP-12E Based On ESP8266”

There are no reviews yet.

SHOPPING CART

close