{"id":7923,"date":"2019-09-14T09:57:02","date_gmt":"2019-09-14T09:57:02","guid":{"rendered":"https:\/\/opponix.com\/?post_type=product&p=7923"},"modified":"2021-10-24T15:21:05","modified_gmt":"2021-10-24T15:21:05","slug":"rs485-to-ttl-rs485-sp3485-communication-module-rs-485-breakout-for-arduino","status":"publish","type":"product","link":"https:\/\/opponix.com\/product\/rs485-to-ttl-rs485-sp3485-communication-module-rs-485-breakout-for-arduino\/","title":{"rendered":"RS485 TO TTL RS485 SP3485 COMMUNICATION MODULE RS-485 BREAKOUT FOR ARDUINO"},"content":{"rendered":"
Description:<\/strong><\/p>\n This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps. This board requires a very low amount of power and can operate from a single +3.3VDC supply.<\/p>\n This breakout board includes the SP3485 RS-485 transceiver, filter capacitor, and other components shown on the schematic. We’ve broken out the RS-485 output to three different connections: (1) an RJ-45 connector, (2) a 3-pin 3.55mm screw terminal, and (3) a 3-pin 0.1″ pitch header; none of these output connectors come populated.<\/p>\n Features:<\/strong><\/p>\n Fully equipped with SP3485 RS-485 transceiver and supporting components Description: This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can<\/p>\n","protected":false},"featured_media":7924,"comment_status":"open","ping_status":"closed","template":"","meta":{"nf_dc_page":""},"product_brand":[],"product_cat":[306,251,305],"product_tag":[],"class_list":{"0":"post-7923","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-board-and-shields","7":"product_cat-electronic-componets","8":"product_cat-module-for-arduino","10":"first","11":"instock","12":"sale","13":"shipping-taxable","14":"purchasable","15":"product-type-variable"},"yoast_head":"\n
\nOperates from a single +3.3V supply
\nInteroperable with +5.0V logic
\nRS-485 input\/output broken out to RJ-45 connector, 3.5mm screw terminal, and 0.1″ pitch header
\nDriver\/Receiver Enable connected to RTS line
\n-7V to +12V Common-Mode Input Voltage Range
\nAllows up to 32 transceivers on the serial bus
\nDriver Output Short-Circuit Protection<\/p>\n","protected":false},"excerpt":{"rendered":"