Model |
DSO5072P |
Acquisition |
|
Sample Rate |
Real-Time Sample: 1GS/s |
|
Inputs |
Inputs Coupling |
AC, DC, GND |
Inputs Impendance |
1MΩ±2% //20pF±3pF |
Horizontal System |
|
Sample Rate Range |
500MS/s–1GS/s |
|
Waveform Interpolation |
(sin x)/x |
|
Record Length |
40K |
|
SEC/DIV Range |
4ns/div to 40s/div |
|
Sample Rate and
Delay Time Accuracy |
±50ppm(at over any ≥1ms time interval) |
|
Position Range |
20ns/div to 80us/div; (-8div x s/div) to 40ms;
200us/div to 40s/div; (-8div x s/div) to 400s |
|
Delta Time Measurement Accuracy
(Full Bandwidth) |
Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns);
>16 averages:± (1 sample interval + 100ppm × reading + 0.4ns);
Sample interval = s/div ÷ 200 |
|
Vertical System |
|
Vertical Resolution |
8-bit resolution, all channel sampled simultaneously |
|
Position Range |
2mV/div to 10V/div |
|
Bandwidth |
70MHz |
|
Rise Time at BNC( typical) |
5ns |
|
Bandwidth Limit |
20MHz |
|
Low Frequency Response (-3db) |
≤10Hz at BNC |
|
DC Gain Accuracy |
±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div |
|
Trigger System |
|
Trigger Types |
Edge, Video, Pulse, Slope, Over time, Alternative |
|
Trigger Source |
CH1, CH2, EXT, EXT/5, AC Line |
|
Trigger Modes |
Auto, Normal, Single |
|
Coupling Type |
DC, AC, Noise Reject, HF Reject, LF Reject |
|
Trigger Sensitivity
(Edge Trigger Type) |
DC(CH1,CH2):
1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
DC(EXT):
200mV from DC to 100MHz; 350mV from 100MHz to 200MHz;
DC(EXT/5):
1V from DC to 100MHz;1.75V from 100MHz to 200MHz;
AC: Attenuates signals below 10Hz;
HF Reject: Attenuates signals above 80kHz
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz |
|
Trigger Level Range |
CH1/CH2: ±8 divisions from center of screen;
EXT: ±1.2V;
EXT/5:±6V |
|
Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20ns |
CH1/CH2: 0.2div × volts/div within ±4 divisions from center of screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV); |
|
Set Level to 50%(typical) |
Operates with input signals ≥50Hz |
|
Video Trigger |
|
|
Video Trigger Type |
CH1, CH2: Peak-to-peak amplitude of 2 divisions;
EXT: 400mV;
EXT/5: 2V |
|
Signal Formats and Field Rates, Video Trigger Type |
Supports NTSC, PAL and SECAM broadcast systems for any field or any line |
|
Holdoff Range |
100ns ~ 10s |
|
Trigger Frequency Counter |
|
Readout Resolution |
6 digits |
|
Accuracy (typical) |
±30ppm (including all frequency reference errors and ±1 count errors) |
|
Frequency Range |
AC coupled, from 4Hz minimum to rated bandwidth |
|
Display |
|
Display Type |
7 inch 64K color TFT (diagonal liquid crystal) |
|
Display Resolution |
800 horizontal by 480 vertical pixels |
|
Display Contrast |
Adjustable (16 gears) with the progress bar |
|
Probe Compensator Output |
|
Output Voltage( typical) |
About 5Vpp into ≥1MΩ load |
|
Frequency(typical) |
1kHz |
|
Power Supply |
|
Supply Voltage |
100-120VACRMS(±10%), 45Hz to 440Hz, CAT II
120-240VACRMS(±10%), 45Hz to 66Hz, CATII |
|
Power Consumption |
<30W |
|
Fuse |
2A, T rating, 250V |
|
Environmental |
|
Temperature |
Operating: 32°F to 122°F (0°C to 50°C);
Nonoperating: -40°F to 159.8°F (-40°C to +71°C) |
|
Cooling Method |
Convection |
|
Humidity |
+104°F or below (+40°C or below): ≤90% relative humidity;
106°F to 122°F (+41°C to 50°C): ≤60% relative humidity |
|
Altitude |
Operating: Below 3,000m (10,000 feet);
Nonoperaring: Below 15,000m(50,000 feet) |
|
Mechanical |
|
Size |
Length 385mm, Width 200mm, Height 245mm |
|
Weight |
3.5KG(with Packing); 2.08KG(without Packing) |
|
There are no reviews yet.