3D Printer StepStick DRV8825 Stepper Motor Driver
999 in stock
AED 8.50 AED 10.00
The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor driver is a breakthrough. The module has a pin out and interface that is almost identical to our A4988 stepper motor driver carrier, so it can be used as a higher performance drop-down menu for these boards in many applications. The DRV8825 features adjustable current limit, over current and over temperature protection, and six micro-resolutions (down to 1/32-step). It is available in 8.2 – 45 V and can deliver up to about 1.5 per phase without fins or forced air flow (rated up to 2.2 with enough extra cooling per roll).
| brands | ARDUINO |
|---|
1. Simple steps and direction control interface
2. Six different step resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step
3. CAN interface directly with 3.3 V and 5 V systems
4. Thermal shutdown over temperature, overcurrent shutdown, undervoltage lockout
5. Short to ground short circuit load protection
6.4 layer 2 oz copper PCB for improved heat dissipation
7. Exposed solder under driver IC Ground pad on the bottom of the printed circuit board
8. Module size, pin and interface match the A4988 stepper motor driver operator in many ways
9. Adjustable current control allows you to set a potentiometer that allows you to use the step The voltage above the rated voltage of the motor to achieve a higher step rate output is a large current
10. Intelligent chopper control can automatically select the correct current attenuation mode (attenuation fast or slow attenuation)
11. Is a large 45 V supply voltage
12. Built-in voltage regulator (requires any external logic supply voltage)
There are no reviews yet.